|
| |
|
|
|
| |
|
|
|
| |
| QCDC Bow Loading System |
|
| |
|
This quick connect disconnect coupler is compact any can be fitted to any rig or tanker.
Dimensions: length 3.9m x width 3.2m x height 3.2m
Weight: 10te.
Manufactured by M.I.B.
Units consist of:
- 2 x Bodewew 5 te hydraulic winches,
- 4 x hydraulic clamps (50te rated)
- Hydraulic integral ball valve
- 4 x load sensors for ESD activation.
- Joy stick control chest pack.
- Zone rated HPU.
- Twin motor.
- Lower connector plate
- c/w spring activated ball valve
|
|
|
 |
|
| |
|
|
|
| |
|
|
| |
| Import / Export Chute |
|
| |
|
| Rig end, tanker end chute. Used for end termination manifold. Chute used to connect flexible hose, marine breakaway coupling, and ball valve connecting to a fixed spool at the inboard side of the chute. |
|
|
 |
|
| |
|
|
|
| |
|
|
|
| |
|
|
| |
|
|
|
| |
| Almon Johnson Spooling Unit |
|
| |
|
This spooling unit was specifically designed and built to handle Manuli flexible riser. The spooling machine can also handle jumper hoses, umbilical, and long length fibre ropes for deep water moorings. It has a Hagglund motor, and is electro hydraulically driven.
The unit is road transportable and comes with level winder, steel foundation and 65te lift beam. Fully loaded it can take 1200m of 6” i.d hose.
Dimensions: length 9.75m x Width 3.75m x height 4.40m
weight: 24te.
Line Pull: 15te
Core Radius: 1.25m
Load Capacity: 120te
1200m 6" id hose
Road Transportable
|
|
|
 |
|
| |
|
|
|
| |
|
|
|
| |
|
|
| |
| Large Spooler |
|
| |
|
This unit will also be used for the same applications as the AJ machine. Similar in size, with a bigger core diameter.
Dimensions: length 8.6m x Width 3.8m x height 4.4m
weight: 28te c/w 75te lifting beam.
Line Pull: 15te
Core Radius:1.5m
Load Capacity: 75te
1000m 6" hose
Road Transportable |
|
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
| |
| Single Hose Spooler |
|
| |
|
This spooler is designed primarily for Manuli flexible hoses. It can also be used for umbilicals and fibre rope.
Dimensions: length 6.5m x Width 2.4m x height 2.5m
weight: 6te.unloaded
Line Pull: 1te
Core Radius:0.6m
Load Capacity: 15te
300m 6" hose
Road Transportable
|
|
|
 |
|
| |
|
|
|
| |
|
|
|
| |
|
|
| |
| Manuli Hose |
|
| |
|
|
Mooring systems has one of the largest stocks of new and used certificated Manuli hose in Europe. These hoses are stored on 6m x 2.4m drums, in 300m and 200m lengths.
Due to demand, mooring systems Ltd. has recently purchased 4 new riser hoses.
This will give MSL the capability to pull together complete export pipelines from stock, at very short notice.
Hose description: 6” H1993 6 ply riser hose
Length: 200mt
Working pressure: 55 Bar
Test pressure: 83Bar
Hose outside diameter: 211 mm
End fittings: 6” ASME 600 RTJ low profile couplings other end
Max fluid temperature: +92c
Hose supplied on: Steel storage reel
|
|
|
 |
|
| |
|
|
|
| |
|
|
|
| |
|
|
| |
| New 76mm RQ4 Chain |
|
| |
|
Mooring systems Limited has presently 20,000 ft of 76mm anchor chain grade R4 new and unused in stock. Manufactured by Vicinay in Spain this chain is available for rental or purchase..
Click here for certification
|
|
|
 |
|
| |
|
|
|
| |
|
|
|
| |
|
|
| |
Pusnes Connector
c/w Adapters and Swivel |
|
| |
|
The Pusnes connectors in stock is a standard connector for DP shuttle tankers.
Comes c/w 20” > 12” reducing spool, 12” bearing swivel, lifting lug cross over, 12” > 6” reducing spool.
|
|
|
 |
|
| |
|
|
|
| |
|
|
|
| |
|
|
|
|
| |
Miscellaneous Equipment |
|
| |
|
|
| |
 |
|
Lifting Beams
30te short: For lifting umbilical reels / wire rope drums c/w through bar.
30te long: For lifting drums up to 5 mt wide.
25te 6m : For lifting Manuli drums
65te 8.5m: For lifting the AJ Spooling unit.
15te: 6m: For lifting concrete mates, ROV activation facility. |
| |
|
|
 |
|
Hydraulic Chain Stopper
Swl 300te, Proof load 340te
Chain Diameter Size: 84mm > 92mm
length 2.24m x width 1.94m x height 1.18m
Weight: 4300kg |
| |
|
|
 |
|
Clump weights / Cable turning points.
2 x clump weights in stock, designed to act as ‘turning points’ on the sea bed for cable or umbilical lay.
Lifting Points: 1 x 17te on top / 4 x 12te lifting points on the sides.
Dimensions: height 2.9m, base 2.4m, top 1.6m
Weight: 10te in Water
|
| |
|
|
 |
|
Buoyancy Units
200kg buoyancy modules complete with inserts. |
| |
|
|
 |
|
Load cells
2 x sizes , types of cell in stock , 50te load shackle type c/w readouts
2 x 300 te plate type with load pin |
| |
|
|
 |
|
Steelite rope.
DNV certified 60mm ( 244te mbl )
DNV certified 52mm ( 175te mbl )
Over 1000m in assorted lengths. Soft eyes each end. |
| |
|
|
 |
|
Various Rigging containers
Mooring systems Ltd has 2 x rigging containers fully stocked with tools and rigging equipment required for operational use. Fully certified c/w lifting rigging.
Dimensions: 1.8m long x 2m wide x 2.9m height.
|
| |
|
|
|
|
|
| |
Copyright © Mooring Systems Limited 2009 |
|
|
