150te spooler

This winch is designed to rotate reels of wire, rope, cables or umbilical. There are three removable shafts of different diameters that support the reel through a hole in the centre with the shaft acting like an axle. The unit can accept reels up to 150Tonnes in weight.. The unit is equipped with 3 sizes of shaft, 5”, 7”, & 9” in Diameter. These diameters can be tailored to suit differing reel bores via project specific adaptors.

The end pedestal is bolt able and can be easily moved along the base frame to accommodate any width of reel up to a maximum of 3750mm. 75te and 200te spoolers also available.

Load capacity 150te

Max drum diameter 5mt

Max drum width 3.7mt

Spooler length: 8mt

Width: 2.8mt

Height: 3.4mt

Weight (exc reel) 15te

Projects

DIDON TCMS Installation

Location: Tunisia Client: PA Resources Water Depth: 80m No. of Risers: 1 + Umbilical Seastate: Hs = 7m

Westaf Stand Alone Mooring

Location: Nigeria Client: ABC Maritime Water Depth: 65m Tanker: 250,000 DWT Seastate: Hs = 5m

Riser Installation

Location: India Client: ONGC Mooring Systems installed a 400mt high pressure riser offshore India. Due to the nature of...

View all Projects →

Equipment Hire

Mooring Components

The mooring node is for connecting the three legs for the TCMS mooring, and the chafe chain on the upper lug of the node. Built by Vicinay in Spain, the node weights 12 tonne and fits 130mm Shackles .

76mm RQ4 Chain

Mooring systems Limited has presently 20,000 ft of 76mm anchor chain grade R4 new and unused in stock. Manufactured by Vicinay in Spain this chain is available for rental or purchase.

View all Equipment Hire →

Recent Projects

PA Resources Project

Services provided: Engineering / Mooring team / rigging container c/w equipment / spooler and riser.

TruAxis Project

Services provided: Supply of Spooling equipment, installation rigging team .

PetroSA Project

Services provided: Supply of 500mt of Manuli riser. Spooling equipment / buoyancy / Riser design – analysis.

View all Recent Projects →