Mooring Systems Ltd were approached by Petrofac Engineering Ltd to provide equipment and expertise to modify the existing umbilical arrangement offshore Tunisia. Mooring Systems role was to:
The work involved lowering the damaged umbilical from the FPSO through the guide frames, and transferring them onto the DSV. These were then pulled onboard by the Mooring Systems spooler.
The damaged section was substituted for a temporary umbilical, in order to maintain maximum production. Once the damaged umbilical was repaired onshore it was returned to the field, installed, tested and de-rigged.
This project was conducted in a safe and controlled manner, on time and within budget.
Location: India Client: ONGC Mooring Systems installed a 400mt high pressure riser offshore India. Due to the nature of...
Location: Nigeria Client: ABC Maritime Water Depth: 65m Tanker: 250,000 DWT Seastate: Hs = 5m
Location: Tunisia Client: PA Resources Water Depth: 80m No. of Risers: 1 + Umbilical Seastate: Hs = 7m
The mooring node is for connecting the three legs for the TCMS mooring, and the chafe chain on the upper lug of the node. Built by Vicinay in Spain, the node weights 12 tonne and fits 130mm Shackles .
Mooring systems Limited has presently 20,000 ft of 76mm anchor chain grade R4 new and unused in stock. Manufactured by Vicinay in Spain this chain is available for rental or purchase.
Services provided: Engineering / Mooring team / rigging container c/w equipment / spooler and riser.
Services provided: Supply of Spooling equipment, installation rigging team .
Services provided: Supply of 500mt of Manuli riser. Spooling equipment / buoyancy / Riser design – analysis.